Duotight Ball Lock Disconnect Gas (Grey+Red) - 8mm (5/16")

Duotight Ball Lock Disconnect Gas (Grey+Red) - 8mm (5/16")

This all-new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, quickly and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical-resistant materials with stainless springs and ball bearings - no cheap ABS plastics here. It is highly resistant to commonly used chemicals such as phosphoric-based sanitisers and caustics.

The minimal form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and can be completely taken apart for cleaning with no tools required - no need ever to have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design makes this the best value and the best-designed home brew quick disconnect ever manufactured.

This ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated Duotight fitting, the line will push directly into this fitting.

Some of the features include:

1. Duotight push-in: These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect—no need for additional threaded fittings. Push the beer/gas line in, and you are done!
2. Compact: The world's most compact ball lock disconnect every manufactured. This is the only ball lock disconnect that allows standard ball lock kegs to be double-stacked while still connected to beer and gas lines. This new compact form factor is excellent for tight spaces or fridges where you want to pack as many kegs in as possible.
3. Overmoulded Poppet: The over-moulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi. You will never have issues with the o-ring blowing out.
4. Tool-less Disassembly: Other ball lock disconnects require a tool such as a flat head screwdriver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making them easier to break down for cleaning. It's never been easier to remove hop particles from your ball lock disconnects.
5. Extreme Chemical Resistance: No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polyketone resin body, EPDM and PP/EPDM over-moulded poppet. This makes this ball lock disconnect resistant to harsh chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acids or base chemicals which are commonly used in homebrewing.
6. Toughness: This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
7. High Flow: The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.