BlowTie Spunding Valve Kit

BlowTie Spunding Valve Kit

VERSION 2

BlowTie Complete Kit (Diaphragm Spunding Valve)

This kit has been designed for simplicity and ease of putting together.

If you want to control the pressure retained in a pressure vessel that is releasing pressure, then the BlowTie Diaphram Spunding Valve is the tool for the job.

The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.

This BlowTie unit can be easily disassembled for cleaning using a Phillips head screwdriver.

Designed to suit 8mm (5/16") Evabarrier Tubing. It's compatible with both.

This Kit Contains:

1 x BlowTie Spunding Valve Gen 2 with 0-60 psi Integrated Gauge

1 x Premium Ball Lock Disconect MFL (Grey Gas)

1 x duotight 8mm x FFL fitting for Premium Ball Lock Disconnect

1 x Rigid 8mm plastic joiner tube - the 4mm ID Tubing or 5mm ID .

Specifications:

1. Suits pressures 0-4 bar/0-60 psi (but with different gauges, the unit can go above 100psi)

2. Made from food-grade acetal

3. Stainless screws

4. 8mm (5/16") push on both sides

Pressure Fermentation

With pressurised fermentation becoming ever more popular, it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process. The BlowTie has been designed specifically for this reason.

Pressure Transfers

When transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason, the BlowTie can consistently control this head pressure giving you more consistent results without losing carbonation in the process.

Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation. Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.

The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.