Nitrogen Regulator With Two Manometers

Inert Gas Regulator for Disposable Cylinder (N2 - Nitrogen, Ar - Argon, CO2 Compatible with M10 Thread)

Includes:
- Swivel nut and barb to suit 4mm ID, 5mm ID or 6.5mm ID beer and gas line.
- 2 x Spare regulator washers

Duotight Fitting compatible
To use a push-in fitting on this regulator, you will need to order 1 x Duotight FFL x 8mm Push In

Nitrogen (N2) Compatible
Nitrogen doesn't dissolve as easily into liquid as Carbon Dioxide (CO2). The nitrogen produces tiny bubbles that feel smooth on the tongue, exscenuating a creamy effect in beer/coffee. Another typical taste factor that beer brewers notice is that it can quell bitterness.
Nitro also accentuates the malt flavours compared to CO2. Other taste factors commonly associated with using nitrogen is a rich mouthfeel sensation. These beers/coffees, when poured, will have a cascading effect in the glass. The nitrogen bubbles appear to be falling to the bottom, while the bubbles in the middle of the glass circle upwards. These systems are extremely popular in new-age coffee shops, as the nitro provides a creamy effect without the need of adding milk!
Argon (Ar) Compatible
Carbon Dioxide (CO2) Compatible

Instructions
Attach the regulator to the top of your disposable cylinder. Turn the pressure up to the desired level.
To avoid leaks and returning to an empty bottle, please triple-check every connection point on your system or disconnect your gas cylinder between uses.