Tri Clamp
Code: GEB4190
1.5" Tri Clamp - Hop Bong - Sight GlassThe 1.5" Tri Clamp Hop Bong Sight Glass is a versatile, pressurisable accessory designed to give brewers more control, more clarity and more confidence during dry hopping and inline processes. Named purely for its appearance, this compact unit lets you add oxyg..
£18.19
Ex Tax:£15.16
Code: GEB4184
1.5" Tri Clamp - Pressure and Vacuum Relief Valve (1.5BAR-22psi)This 1.5 in Tri Clamp pressure and the vacuum relief valve is a great way to protect your tank. It will relieve pressure over 1.5 BAR, but will also let in air if the tank is a vacuum inside to prevent the tank from imploding via cold c..
£95.42
Ex Tax:£79.52
Code: GEB2849
1.5" Tri Clamp End Cap..
£2.27
Ex Tax:£1.89
Code: GEB4332
1.5" Tri Clamp Gas In With Pressure Relief ValvePressure Relief Valve (PRV) helps protect the vessel in case the CO2 regulator is set too high, or CO2 builds up inside the vessel due to spontaneous fermentation.Can be used for pressure transfer.The PRV is adjustable, to increase discharge pressure a..
£21.41
Ex Tax:£17.84
Code: GEB2860
Tri Clamp Sight GlassThe 1.5" Tri Clamp Sight Glass is designed to give clear visual monitoring of liquid flow within your brewing or sanitary system. Fitted with large 1.5" tri clamp flanges on both ends, it integrates easily into standard tri clamp setups, allowing you to observe wort, water, or c..
£46.70
Ex Tax:£38.92
Code: GEB4191
1.5" Tri Clamp Spunding Valve - Replacement Polycarbonate CupReplacement Polycarbonate Cup if you happened to damage or lose the polycarbonate surround for the 1.5 Inch Tri Clamp Spunding Valve during routine cleaning and replacement of sanitiser solution post-fermentation.This part is for the polyc..
£14.71
Ex Tax:£12.26
Code: GEB4183
1.5" Tri Clamp Spunding Valve with Pressure GaugeThese valves enable fermenters to accurately ferment under pressure and/or condition beer before transferring to a keg. Perfect for the brewer that wants to be able to dial in pressures on the fly without having to match the release pressure using a g..
£284.11
Ex Tax:£236.76
Code: GEB4331
1.5" Tri
Clamp straight valveThis ball valve has a two piece design that can be disassembled for cleaning.Length between Tri-Clamp flanges 140 mmWrench flats are 45 mm..
£40.81
Ex Tax:£34.01
Code: GEB4330
1.5" Tri Clamp T valveThis 3-way ball valve is L-drilled and the ball rotates
360 degrees, allowing 3 operating positions. Please make sure the
available positions are suitable for your application.Typically, with an
L valve the fluid entrance would be the middle leg, with the exit on
either..
£69.29
Ex Tax:£57.74
Code: GEB4192
1.5" Tri Clamp TeePerfect for any brewery build or wide range of fermenter parts that suit the 1.5" tri clamp standard.These fittings are often used in the medical, food processing and other industries where high levels of cleanliness are required.This sanitary tri clamp (also known as ferrule fitti..
£13.99
Ex Tax:£11.66
Code: GEB4333
1.5" Tri Clamp With Pressure Relief ValvePressure Relief Valve (PRV) helps protect the vessel in case the CO2 regulator is set too high, or CO2 builds up inside the vessel due to spontaneous fermentation...
£12.46
Ex Tax:£10.38
Code: GEB4259
1.5" Tri Clamp x Sanitary NukaTap Shank Sample PortThese long shanks are suitable to attach to large commercial fermenters and bright tanks with a 1.5" Tri Clamp Port.Being removable and completely washable, it makes this device extremely easy to clean and sanitise before use.Ideally used with the N..
£15.49
Ex Tax:£12.91
Code: GEB2326
1.5" weld cap ferrule, stainless steel..
£1.75
Ex Tax:£1.46
Code: GEB2845
Ball Lock Gas Post to 1.5" Tri Clamp..
£7.06
Ex Tax:£5.88
Code: GEB2842
Ball Lock Liquid Post to 1'5" Tri Clamp..
£7.06
Ex Tax:£5.88
Code: GEB2846
Ball Lock Tapping Head to 2" Tri Clamp..
£33.22
Ex Tax:£27.68
Code: GEB4182
Diaphragm Pressure Gauge (1.5" Tri Clamp) 0-2 Bar (0-30psi)The rear mount design suits most fermenters, bright beer tanks and brewery parts.Conventional pressure gauges contain a capillary tube that the gas enters driving a needle. The capillary tube is impossible to clean making them less sanitary...
£38.44
Ex Tax:£32.03
Code: GEB4193
PCO1881 Male x 1.5" Tri Clamp (POK)For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 1.5 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle)Perfect to use along side 1.5" Tri-Clamp Hop Bong- PCO1881 6.35mm duotight ..
£5.14
Ex Tax:£4.28