FermZilla 27 litre Tri-Conical Gen3 - Starter Kit

FermZilla 27 litre Tri-Conical Gen3.2 - Starter Kit

Introducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule moulded into the tank and redesigned tri-clover dump valve.

 

The FermZilla 27 l is a conical fermentation vessel that gives homebrewers a high degree of control. Thanks to the transparent side wall, made of high-quality PET, you can always see what is happening in the fermentation barrel. In addition, this fermentation vessel has a great advantage in that it can be pressurised (max. 2.4 bar).

The yeast can easily be removed thanks to the handy collection ball at the bottom of the fermenter. This allows the clarification process to start immediately without transferring to another tank or vessel. This prevents a lot of unnecessary work and reduces the risk of contamination. This yeast collection ball also makes it possible to harvest yeast for reuse in the next brew.

• 1 vessel for fermenting, clarifying and dispensing
• Transparent side wall, made of high-quality PET
• Fermentation can be pressurised
• Handy yeast collection ball
• Large 12 cm opening

What's new the difference between Gen2 and Gen3?

1. Molded 3 inch tri clover ferrule in the body of the FermZilla tank

2. 3 inch to 3 inch tri clover Butterfly Valve

3. 3 inch tri clover compatible Collection Container

Is it easier to clean / take apart than the Gen2?

YES, Conical PET fermenter is the easiest to disassemble and clean into all the nooks and crannies. Release all pressure inside the vessel and detach the tri-clover clamps.

Optional pressure kit

We recommend buying the optional pressure kit to get the most out of your FermZilla. This allows you to use the FermZilla as a dispensing vessel but also makes it possible to transfer to another keg without loss of pressure.

• large 12 cm opening
• pressurisable up to 2.4 bar
• 1 vessel for fermenting, clarifying and dispensing
• large yeast collection ball: 600 ml
• width x height: 388 mm x 856 mm (incl. airlock)

Contents:

What does the starter kit come with?

1 x FermZilla Tri-Conical Tank with Metal Neck Ring
1 x Stainless Steel Stand with Swing Handles
1 x Stainless Steel Handle Assembly
1 x Lid assembly including threaded lid ring, flat lid with RED 35psi PRV and lid o-ring
1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for Lid
1 x Three Piece Airlock
1 x Strip Stick on Thermometer
1 x Level Indicator Sticker (Litres and Gallons)
1 x 3 Inch tri-clover to 3 Inch tri-clover Butterfly Valve
2 x 3 Inch tri-clover 3 Piece Clamp
2 x 3 Inch tri-clover Beaded Seal
1 x 600mL Collection Container with 2 x Blank PCO1881 Black Caps and 3 Inch Tri-Clover Cap
1 x Spare Lid O-ring
1 x Spare Collection Container O-ring

Attention: 

• Liquids in the FermZilla may never exceed 50 °C.
• Always consult the manual before assembling the FermZilla.
• Do not overtighten and ensure that all components are mounted straight on each other.
• Geterbrewed is not liable for damage caused by improper assembly.

Specifications

Dump valve: Yes

Including stand: Yes

Unitank: Yes

Single walled: Yes

Sample valve: No

Insulation jacked included: No

Double walled: No

Type of valve: butterfly

Material: PET

Bottom shape: conical

Type of lid: fixed

Type of dump valve: butterfly

Full volume: 27 l

Fermentable volume: 22 l

Type of valve connection: tc

Pressure Rating: 2.4 bar

Dimensions

Width: 41.00 cm

Height: 41.00 cm

Length: 50.00 cm

Weight: 6.00 kg