HyperBoost Simcoe Hop Extract - 100gm

HyperBoost Simcoe Hop Extract - 100gm

WHAT IS HYPERBOOST™?

HyperBoost™, formerly YCH 701, is a concentrated hop oil extract produced via a novel supercritical extraction technique.
Intended to amplify hop aromatics and increase yield, HyperBoost excels at adding beautiful hop aroma anywhere pellets are typically used, including cold-side applications. HyperBoost is made from single-hop varieties to deliver variety-specific aroma boosts to your finished beer.

CHIEF ADVANTAGES

• Increased efficiency
• Ease of use
• Increased aroma
• Less storage space needed
• High concentrations of survivable compounds
• Reduction of waste

HOW TO BREW WITH HYPERBOOST?

HyperBoost™ is designed to easily pour into your fermenter as a cold-side addition, adding an intense saturation of hop flavour to your finished beer. Most brewers use HyperBoost as a fermenter addition, but it can also be added to the whirlpool. Using HyperBoost in place of traditional pellets can increase finished beer yield.

• Kettel: HyperBoost is not intended for kettle additions. For early kettle and bittering additions, we recommend pellets or CO2 extract. DynaBoost™ carries variety-specific oil and alpha acid content to the kettle and can be used as a late addition.
  Post-Boil/Whirlpool: Brewers can replace up to 100% of pellets with HyperBoost for whirlpool use. We suggest replacing T-90 pellet additions in the whirlpool at a rate of 50:1 by weight (20 g of HyperBoost to replace 1 kg T-90). Depending on beer style or overall goal, your brewery might use more or less.
• Fermentation: HyperBoost can be used as an active or post-fermentation hop addition. Incorporate HyperBoost anywhere in the process you would typically use pellets.
• Dry hopping: For dry hop additions, YCH recommends using HyperBoost for 25-50% of the addition and adding T-90 or Cryo® pellets for the remainder of the hop charge. As a dry hop, we suggest starting with a replacement rate of 100:1 HyperBoost to T-90 pellets by weight (10 g HyperBoost in place of 1 kg T-90) to 125:1 (8 g HyperBoost in place of 1 kg T-90).

DOSING
YCH recommends replacing up to 100% of the Whirlpool or 25% to 50% of the Dry Hop additions with HyperBoost and leaving up to 50% of the addition as T-90 Hop Pellets and/or Cryo Hops® Brand Pellets.

STORAGE
HyperBoost should be stored in a sealed aluminium bottle container in near-freezing conditions, preferably between 30°F and 41°F (-1°C and 5°C). It remains completely fluid, even below freezing, and will remain stable in closed containers for two (2) years. Please note that HyperBoost is a flammable product and should be stored according to local, state, and federal guidelines.

QUICK FACTS

• Oil-enriched extract product
• Flowable at cold temperatures <0° C
• 40% total hop oil
• Designed for dry hopping and can be used in whirlpool applications
• 1:100 - 1:125 T-90 equivalent
• No plant matter
• Increased hotside yields

BENEFITS

• Leaf material reduction
• Shipping cost reduction
• Higher yields
• High concentrations of survivable compounds
• Less refrigerated storage space needed
• Varietal-specific aroma profiles