Tri Clamp
Code: GEB2329
1.5" Tri Clamp - 10mm Hose Barb..
£4.36
Ex Tax:£3.63
Code: GEB4190
1.5" Tri Clamp - Hop Bong - Sight GlassNamed purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.Constructed from Nylon 12:..
£18.19
Ex Tax:£15.16
Code: GEB4184
1.5" Tri Clamp - Pressure and Vacuum Relief Valve (1.5BAR-22psi)This 1.5 in Tri Clamp pressure and the vacuum relief valve is a great way to protect your tank. It will relieve pressure over 1.5 BAR, but will also let in air if the tank is a vacuum inside to prevent the tank from imploding via cold c..
£95.42
Ex Tax:£79.52
Code: GEB2325
1.5" Tri Clamp Butterfly ValveButterfly valves are known to be the most sanitary valve design which is why they are a favourite for home brewing hardware. These 1.5" butterfly valves are able to hold significant amounts of pressure, made with high quality EPDM seals and can easily be serviced ..
£45.31
Ex Tax:£37.76
Code: GEB2849
1.5" Tri Clamp End Cap..
£2.27
Ex Tax:£1.89
Code: GEB4332
1.5" Tri Clamp Gas In With Pressure Relief ValvePressure Relief Valve (PRV) helps protect the vessel in case the CO2 regulator is set too high, or CO2 builds up inside the vessel due to spontaneous fermentation.Can be used for pressure transfer.The PRV is adjustable, to increase discharge pressure a..
£21.41
Ex Tax:£17.84
Code: GEB2860
1.5" Tri Clamp Sight GlassLarge 1.5 inch TC flanges both ends. Breaks down for easy cleaning...
£55.00
Ex Tax:£45.83
Code: GEB4191
1.5" Tri Clamp Spunding Valve - Replacement Polycarbonate CupReplacement Polycarbonate Cup if you happened to damage or lose the polycarbonate surround for the 1.5 Inch Tri Clamp Spunding Valve during routine cleaning and replacement of sanitiser solution post-fermentation.This part is for the polyc..
£14.71
Ex Tax:£12.26
Code: GEB4183
1.5" Tri Clamp Spunding Valve with Pressure GaugeThese valves enable fermenters to accurately ferment under pressure and/or condition beer before transferring to a keg. Perfect for the brewer that wants to be able to dial in pressures on the fly without having to match the release pressure using a g..
£284.11
Ex Tax:£236.76
Code: GEB4331
1.5" Tri
Clamp straight valveThis ball valve has a two piece design that can be disassembled for cleaning.Length between Tri-Clamp flanges 140 mmWrench flats are 45 mm..
£40.81
Ex Tax:£34.01
Code: GEB4330
1.5" Tri Clamp T valveThis 3-way ball valve is L-drilled and the ball rotates
360 degrees, allowing 3 operating positions. Please make sure the
available positions are suitable for your application.Typically, with an
L valve the fluid entrance would be the middle leg, with the exit on
either..
£69.29
Ex Tax:£57.74
Code: GEB4192
1.5" Tri Clamp TeePerfect for any brewery build or wide range of fermenter parts that suit the 1.5" tri clamp standard.These fittings are often used in the medical, food processing and other industries where high levels of cleanliness are required.This sanitary tri clamp (also known as ferrule fitti..
£20.47
Ex Tax:£17.06
Code: GEB4189
1.5" Tri Clamp with 3/4" Female ThreadPerfect for any brewery build or wide range of fermenter parts that suit the 1.5" tri clamp standard.These fittings are often used in the medical, food processing and other industries where high levels of cleanliness are required.These are welded sanitarily and ..
£6.88
Ex Tax:£5.73
Code: GEB4333
1.5" Tri Clamp With Pressure Relief ValvePressure Relief Valve (PRV) helps protect the vessel in case the CO2 regulator is set too high, or CO2 builds up inside the vessel due to spontaneous fermentation...
£12.46
Ex Tax:£10.38
Code: GEB4259
1.5" Tri Clamp x Sanitary NukaTap Shank Sample PortThese long shanks are suitable to attach to large commercial fermenters and bright tanks with a 1.5" Tri Clamp Port.Being removable and completely washable, it makes this device extremely easy to clean and sanitise before use.Ideally used with the N..
£15.49
Ex Tax:£12.91
Code: GEB2326
1.5" weld cap ferrule, stainless steel..
£1.75
Ex Tax:£1.46
New
Code: GEB4392
2" to 4" Tri Clamp Adaptor Plate2" to 4" Tri Clamp adaptor plate or reducer. Connect two Tri Clamps of different diameters.This essential piece of equipment is the key to enhancing versatility in your fermenter, enabling a flawless connection between components of differing sizes. Designed with the ..
£12.44
Ex Tax:£10.37